The Modbus module with 4 digital outputs was developed for decentralized switching tasks. It is suitable for switching electrical components, such as motors, contactors, lamps, louvers, etc. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The module is provided with a manual control for manually switching the relays. The outputs can be switched by means of standard registers via a Modbus master. Module address, bit rate and parity are set with 2 rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.
The module can also be connected to NZ/AUS/EU LoRaWAN® networks over the LoRa® ModBus Transceiver.
It is also available with BACnet MSTP.
Can be integrated via NBNEXUS into Building Automation, Energy-Management and SCADA.
|Digital I/O||4 Outputs|
|LoRaWAN®||EU868 AU915 AS923|
|Protocol||ModBus RTU - BACnet MSTP|