Supported Devices
NBnano supports hundreds of sensors and I/O devices to be connected over LoRaWAN®, BACnet and ModBus making the NBnano the ultimate device management and protocol conversion platform.
Sensor Categories
Oyster GPS Asset Tracker
LoRaWAN® battery-powered GPS asset tracking device featuring 10+ years battery life. Tracks assets when they’re on the move and enters sleep mode when stationary to conserve power. Rugged design ensured this device can be used indoor or outdoor.
NB310-TILT Tilt Sensor
NB310-TILT is a LoRaWAN® tilt sensor mainly for angle measurement and asset movement detection. With a compact size and 3-axis accelerometer, NB310-TILT can be installed to the objects easily to measure its X, Y, Z tilt angles. It can also detect the movement based on angle changes and send threshold alarms.
LoRaWAN Transceiver – Analog Input
The SenAna is a LoRaWAN transceiver for analogue output sensors and DC voltage monitoring. It has a 4-20mA channel and two DC voltage channels for 0-10V and 0-30V respectively. It reports data based on events and periodically.
LoRaWAN ModBus Master Transceiver
SenMod is a wireless transmitter and receiver that connects equipment using ModBus or 4-20mA standards to a LoRaWAN network. The device acts as a ModBus Master allowing it to communicate with the connected slave devices and relay the data wirelessly.
LoRaWAN Indoor Air Quality sensor
SenAir AQI is a LoRaWAN indoor air quality sensor that measures CO2, temperature, humidity, barometric pressure and VOC (Volatile Organic Compounds).
This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
Thermokon DPA+ Differential Pressure
Differential pressure transmitter for measuring and monitoring overpressure, underpressure, differential pressure and flow volume of air and other non-aggressive gases in fan and filter systems in duct applications. 8 adjustable pressure and flow volume ranges permit use in HVAC applications of clean rooms, process measurement and controls systems.
LoRaWAN Indoor Air Quality sensor
SenAir AQI is a LoRaWAN indoor air quality sensor that measures CO2, temperature, humidity, barometric pressure and VOC (Volatile Organic Compounds).
This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
LoRaWAN CO2, Temperature & Humidity Sensor
SenAir CO2 is an indoor carbon dioxide (CO2), Temperature and Humidity meter. This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB103 Indoor CO2 Monitoring Sensor
NB103 is a compact indoor ambience monitoring sensor for measurement of temperature, humidity, and CO2. The data is shown on the E-ink screen in real time, allowing an occupant to quantify the indoor environment and comfort. NB103 is widely used for office, store, classroom, hospital, etc. Sensor data can also be transmitted using LoRaWAN®. With this low-power technology, NB103 can work for more than 3 years with 2 replaceable batteries.
NB319 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides TVOC, humidity, temperature, CO2, light, barometric pressure and PIR measurements allowing you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
LoRaWAN CO2, Temperature & Humidity Sensor
SenAir CO2 is an indoor carbon dioxide (CO2), Temperature and Humidity meter. This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
NB103 Indoor CO2 Monitoring Sensor
NB103 is a compact indoor ambience monitoring sensor for measurement of temperature, humidity, and CO2. The data is shown on the E-ink screen in real time, allowing an occupant to quantify the indoor environment and comfort. NB103 is widely used for office, store, classroom, hospital, etc. Sensor data can also be transmitted using LoRaWAN®. With this low-power technology, NB103 can work for more than 3 years with 2 replaceable batteries.
LoRaWAN Indoor Air Quality sensor
SenAir AQI is a LoRaWAN indoor air quality sensor that measures CO2, temperature, humidity, barometric pressure and VOC (Volatile Organic Compounds).
This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB319 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides TVOC, humidity, temperature, CO2, light, barometric pressure and PIR measurements allowing you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
LoRaWAN Transceiver – Analog Input
The SenAna is a LoRaWAN transceiver for analogue output sensors and DC voltage monitoring. It has a 4-20mA channel and two DC voltage channels for 0-10V and 0-30V respectively. It reports data based on events and periodically.
LoRaWAN ModBus Master Transceiver
SenMod is a wireless transmitter and receiver that connects equipment using ModBus or 4-20mA standards to a LoRaWAN network. The device acts as a ModBus Master allowing it to communicate with the connected slave devices and relay the data wirelessly.
Thermokon DPA+ Differential Pressure
Differential pressure transmitter for measuring and monitoring overpressure, underpressure, differential pressure and flow volume of air and other non-aggressive gases in fan and filter systems in duct applications. 8 adjustable pressure and flow volume ranges permit use in HVAC applications of clean rooms, process measurement and controls systems.
LoRaWAN 3-Digital Input Sensor
SenDigi is a LoRaWAN digital input sensor that transmits digital signals such as alarms and dry switches. It has three digital inputs that send levels and total count on-events and periodically as a heartbeat message.
LoRaWAN 3-Digital Input Sensor
SenDigi is a LoRaWAN digital input sensor that transmits digital signals such as alarms and dry switches. It has three digital inputs that send levels and total count on-events and periodically as a heartbeat message.
LoRaWAN Pulse Totaliser
The IQnexus Pulse totaliser is an IoT based pulse counter sensor that allows you to transmit and receive totalised pulse data from existing meters such as water, gas, power and heat meters. This device helps efficiency in water, energy and gas meter management by continuously monitoring consumption and detecting faults remotely. Configuration through the LPWAN network, periodic, data encryption and transmission based on events or in real time.
LoRaWAN 3-Digital Input Sensor
SenDigi is a LoRaWAN digital input sensor that transmits digital signals such as alarms and dry switches. It has three digital inputs that send levels and total count on-events and periodically as a heartbeat message.
Oyster GPS Asset Tracker
LoRaWAN® battery-powered GPS asset tracking device featuring 10+ years battery life. Tracks assets when they’re on the move and enters sleep mode when stationary to conserve power. Rugged design ensured this device can be used indoor or outdoor.
LoRaWAN CO2, Temperature & Humidity Sensor
SenAir CO2 is an indoor carbon dioxide (CO2), Temperature and Humidity meter. This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
NB103 Indoor CO2 Monitoring Sensor
NB103 is a compact indoor ambience monitoring sensor for measurement of temperature, humidity, and CO2. The data is shown on the E-ink screen in real time, allowing an occupant to quantify the indoor environment and comfort. NB103 is widely used for office, store, classroom, hospital, etc. Sensor data can also be transmitted using LoRaWAN®. With this low-power technology, NB103 can work for more than 3 years with 2 replaceable batteries.
LoRaWAN Indoor Air Quality sensor
SenAir AQI is a LoRaWAN indoor air quality sensor that measures CO2, temperature, humidity, barometric pressure and VOC (Volatile Organic Compounds).
This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB319 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides TVOC, humidity, temperature, CO2, light, barometric pressure and PIR measurements allowing you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
Thermokon LS02+ Leak Sensor
Leakage sensor for the detection of electrically conductive liquids with LED signal and relay output. Designed for alarm, control and monitoring applications.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB319 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides TVOC, humidity, temperature, CO2, light, barometric pressure and PIR measurements allowing you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
LoRaWAN ModBus Master Transceiver
SenMod is a wireless transmitter and receiver that connects equipment using ModBus or 4-20mA standards to a LoRaWAN network. The device acts as a ModBus Master allowing it to communicate with the connected slave devices and relay the data wirelessly.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB319 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides TVOC, humidity, temperature, CO2, light, barometric pressure and PIR measurements allowing you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
LoRaWAN 3-Digital Input Sensor
SenDigi is a LoRaWAN digital input sensor that transmits digital signals such as alarms and dry switches. It has three digital inputs that send levels and total count on-events and periodically as a heartbeat message.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB319 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides TVOC, humidity, temperature, CO2, light, barometric pressure and PIR measurements allowing you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB500-PP Pipe Pressure Sensor
NB500-PP is designed for measuring pipe pressure in harsh environments and transmitting data using LoRaWAN® technology. With this low power consumption technology, NB500-PP can work up to 10 years with a 19000 mAh battery. NB500-PP is widely used for applications like smart buildings, pipeline and tank systems monitoring, etc.
NB500-SWL Liquid Level Sensor
NB500-SWL is designed for measuring liquid level in harsh environments and transmitting data using LoRaWAN® technology. With this low power consumption technology, NB500-SWL can work up to 10 years with 19000 mAh battery. NB500-SWL is widely used for applications like tank level monitoring, river level monitoring, etc.
LoRaWAN Pulse Totaliser
The IQnexus Pulse totaliser is an IoT based pulse counter sensor that allows you to transmit and receive totalised pulse data from existing meters such as water, gas, power and heat meters. This device helps efficiency in water, energy and gas meter management by continuously monitoring consumption and detecting faults remotely. Configuration through the LPWAN network, periodic, data encryption and transmission based on events or in real time.
LoRaWAN Soil Moisture and Temperature Monitoring
The SenProbe provides readings of soil moisture and temperature at different depths up to 120cm. It is often used to improve soil quality and crop productivity allowing you to know precisely when to irrigate your fields.
NB500-SWL Liquid Level Sensor
NB500-SWL is designed for measuring liquid level in harsh environments and transmitting data using LoRaWAN® technology. With this low power consumption technology, NB500-SWL can work up to 10 years with 19000 mAh battery. NB500-SWL is widely used for applications like tank level monitoring, river level monitoring, etc.
Temperature Probe Sensor
SenTemp is a LoRaWAN IoT based temperature probe device. It is a portable, robust and waterproof solution to obtain critical temperature information from any solid or fluid. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
LoRaWAN Soil Moisture and Temperature Monitoring
The SenProbe provides readings of soil moisture and temperature at different depths up to 120cm. It is often used to improve soil quality and crop productivity allowing you to know precisely when to irrigate your fields.
LoRaWAN CO2, Temperature & Humidity Sensor
SenAir CO2 is an indoor carbon dioxide (CO2), Temperature and Humidity meter. This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
LoRaWAN Indoor Air Quality sensor
SenAir AQI is a LoRaWAN indoor air quality sensor that measures CO2, temperature, humidity, barometric pressure and VOC (Volatile Organic Compounds).
This sensor periodically transmits data to a LoRaWAN network for basic data-logger functions, HVAC and Indoor Air Quality monitoring. With its low power technology this sensor can continuously operate with a battery life of up to 3 years.
NB103 Indoor CO2 Monitoring Sensor
NB103 is a compact indoor ambience monitoring sensor for measurement of temperature, humidity, and CO2. The data is shown on the E-ink screen in real time, allowing an occupant to quantify the indoor environment and comfort. NB103 is widely used for office, store, classroom, hospital, etc. Sensor data can also be transmitted using LoRaWAN®. With this low-power technology, NB103 can work for more than 3 years with 2 replaceable batteries.
NB319 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides TVOC, humidity, temperature, CO2, light, barometric pressure and PIR measurements allowing you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB307 Indoor Air Quality Sensor
The IQnexus IAQ sensor is an ambient air quality sensor compatible with the LoRaWAN protocol. It integrates 9 sensors that provides PM2.5, TVOC, humidity, temperature, CO2, light, barometric pressure, etc. These measurements allow you to track real-time air quality conditions. This IAQ sensor is widely used for offices, stores , classrooms, hospitals, etc.
NB310-TILT Tilt Sensor
NB310-TILT is a LoRaWAN® tilt sensor mainly for angle measurement and asset movement detection. With a compact size and 3-axis accelerometer, NB310-TILT can be installed to the objects easily to measure its X, Y, Z tilt angles. It can also detect the movement based on angle changes and send threshold alarms.
LoRaWAN Pulse Totaliser
The IQnexus Pulse totaliser is an IoT based pulse counter sensor that allows you to transmit and receive totalised pulse data from existing meters such as water, gas, power and heat meters. This device helps efficiency in water, energy and gas meter management by continuously monitoring consumption and detecting faults remotely. Configuration through the LPWAN network, periodic, data encryption and transmission based on events or in real time.
LoRaWAN Weather Station
The IQnexus LoRaWAN IoT weather station has multiple sensors integrated in a single weather station and has a compact design that enables efficient and visually appealing installation. This enables professional weather monitoring through IoT Weather Station allowing you to make precise measurements and send the collected data to the cloud for visualization. It is a compact, robust and ultra-low-cost connectivity alternative to conventional weather stations.
LoRaWAN Weather Station
The IQnexus LoRaWAN IoT weather station has multiple sensors integrated in a single weather station and has a compact design that enables efficient and visually appealing installation. This enables professional weather monitoring through IoT Weather Station allowing you to make precise measurements and send the collected data to the cloud for visualization. It is a compact, robust and ultra-low-cost connectivity alternative to conventional weather stations.
