On the Gateway page (‘Devices’ → ‘Gateways’) you can view your gateways and the last time they received/send a message from/to a device. When setup, it looks like this:
To add a gateway, go to the IQNexus market, select ‘Chirpstack Gateway’ and select new device.
This is the euid of the gateway.
The name you wish to associate with your gateway.
If you have modbus enabled for your project:
MODBUS Unit Identifier
ID you wish to associate with this device (must be unique, between 1 and 254)
MODBUS Master IP Address
This field determines who can retreive data from this device. If this is set to 0.0.0.0, it means that everyone can access this device via modbus if they know the ip. You can limit this by setting this to the ip address that you will be using to retrieve data.
If you have bacnet enabled on your project:
BACNet Unit Identifier
The ID you wish to associate with your bacnet unit
Press apply when done. If not navigated back to ‘Devices’ → ‘Gateways’, navigate there and you will see your new gateway. It will show as active as soon as it recieves a message.